Work with Olympus USB foot switch(Read 3922 times)
Work with Olympus USB foot switch on: June 25, 2014, 11:08:58 AM
Hi,

in a virtual desktop evironment i want to use the foot switch of the Olympus digital dictation/transcription system.
Locally the foot switch works. I open the transcription software and can play and stop the dictate with the foot switch.
But the foots witch doesn't work in the remote desktop. Therefore i installed the Eltima trial version. Connection works and i see the footswitch in the device manager.
But the Olympus software does not see the foot switch. It doesn't work.
Does anybody know the Problem?

Thank you.

Raimund



Re: Work with Olympus USB foot switch Reply #1 on: June 26, 2014, 12:46:56 PM
Can you check if the device works properly if you don't use Remote Desktop Connection, but work on the remote system directly?

As I mentioned in your other topic, not all devices are able to work correctly through Windows RDP, even if USB Network Gate properly redirects the port. And your foot switch may be one of those devices.
« Last Edit: June 26, 2014, 12:48:41 PM by alexander-britt »



 

Sitemap 1 2 3 4 5