USB Network Gate - Stops Sending Data after connection(Read 1484 times)
USB Network Gate - Stops Sending Data after connection on: January 29, 2019, 06:56:59 PM
Using V8, latest build of Usb Network Gate. The initial connection is made, but after that - no data is sent. (in 0.58kb, out 0.96kb).

USB Device being shared is a USB-Serial Controller. Has been working successfully for months. Disconnected and reconnected with same issue. Reboot also does not solve issue. Any suggestions?



Re: USB Network Gate - Stops Sending Data after connection Reply #1 on: February 05, 2019, 03:40:42 PM
Hello,

Thank you for reaching us. First of all, I would recommend performing the following:

1. Disable Firewall on both server and client machines.

2. Try to share a different device and test data transfer. For example USB flash drive.

3. Perform a callback connection from the server side.

If the issue still persists please write your reply to "support@eltima.com" and we will be glad to assist you further.

---
Best regards,
Borys Khokhlenko | Eltima Customer Support | http://www.eltima.com



 

Sitemap 1 2 3 4 5