Virtual VS Standard COM port in Device Manager(Read 1024 times)
Virtual VS Standard COM port in Device Manager on: February 12, 2019, 03:35:20 AM
Hi,

I have an issue where on some computers the comport created through Serial to Ethernet Connector appears as a standard COM port in Device Manager where on others it comes up as a "Eltima Virtual Serial Port (COM1)" under "Virtual Serial Ports 8 (Eltima Software)". The lata cannot be detected in some applications and I cannot find a way of getting it to appear as a standard com port.

Please help.





Re: Virtual VS Standard COM port in Device Manager Reply #1 on: February 12, 2019, 03:42:14 PM
Hello,

Thank you for the question. I assume that you are using Windows 10. The COM ports will not appear in the correct group in Device Manager right after creation. Please perform 2 reboots and recheck Device Manager.

---
Best regards,
 
Borys Khokhlenko | Eltima Customer Support | http://www.eltima.com



 

Sitemap 1 2 3 4 5