Serial Splitter + Serial to ethernet connector combo problem(Read 6827 times)
Hello

I'm using Serial splitter in combination with Serial to ethernet connector. Configuration is shown on the following pictures:

Computer 1:
SEC
http://shrani.si/?1Z/l4/3ZhSxXMo/sec1.jpg
Splitter
http://shrani.si/?k/Y6/2hX05vT8/split1.jpg

Computer 2:

http://shrani.si/?31/tm/JuRh9Lg/sec-2.jpg

All devices are connected to computer 1. First I split real serial ports (1 -> 5, 10), (3 -> 6, 11), (4 -> 7, 12). Then I share ports 5, 6 and 7 with SEC. On computer 2 I connect to those shared ports so that I have ports 10, 11 and 12 available on both computers. Problem is that SEC is not able to share COM 6. Log file from SEC on computer 1:

18.01.2012 06:47:57 - ------------------------------------
18.01.2012 06:47:58 -           start service             
18.01.2012 06:47:58 - ------------------------------------
18.01.2012 06:47:58 - COM13 [Client]: Port COM13 successfully created/opened
18.01.2012 06:47:58 - COM13 [Client]: "COM13 [Client]" client connection was created
18.01.2012 06:47:58 - COM5 [Server]: Listening on TCP-port 5000 started
18.01.2012 06:47:58 - COM5 [Server]: "COM5 [Server]" server connection was created
18.01.2012 06:47:58 - COM6 [Server]: Error: cannot open/create port COM6
18.01.2012 06:47:58 - COM6 [Server]: Error: cannot initialize connection, please, see the reason above
18.01.2012 06:47:58 - COM7 [Server]: Listening on TCP-port 5002 started
18.01.2012 06:47:58 - COM7 [Server]: "COM7 [Server]" server connection was created

Regards
Klemen



 

Sitemap 1 2 3 4 5