Set or get flags defining flow control stuff
Property Value
FlowReplace can be set to one of the following values:
| |
FlowReplace |
| | | [out] FlowReplace is a set of flags defining flow control stuff. Can be combination of the following flags: |
| | | | Value | Meaning | Hex | | SERIAL_AUTO_TRANSMIT | Use the XON/XOFF protocol based flow control for output. | 0x01 | | SERIAL_AUTO_RECEIVE | Use the XON/XOFF protocol based flow control for input. | 0x02 | | SERIAL_ERROR_CHAR | If set, the ErrorChar is placed in the stream of received characters on error
conditions like buffer overflow, frame errors and so on. | 0x04 | | SERIAL_NULL_STRIPPING | If set, the reception of a NULL character is ignored. | 0x08 | | SERIAL_BREAK_CHAR | If set, the BreakChar is placed in the stream of received characters when a
break condition was detected. | 0x10 | | SERIAL_RTS_CONTROL | Enables the RTS line when the device is opened and leaves it on. | 0x40 | | SERIAL_RTS_HANDSHAKE | Use the modem signal RTS for input flow control. | 0x80 |
|
See also
HandShake properties, XOnLimit properties, XOffLimit properties