Reproduce a monitoring session back to the serial port

With Serial Port Monitor it is possible to reproduce a monitoring session back to the serial port. To do this, please follow the steps below:

1. Start or open a monitoring session.

2. Select “Session -> Reproduce” session from the main menu.

reproduce0

3. Configure the settings.

reproduce

  • Use port – specify the port you would like to reproduce data to.
  • Send requests to the port – reproduce data that was written to the serial port by the application.
  • Respond as a device – reproduce data that was written to the serial port by the serial device.
  • Preserve time intervals – enable this option if you would like to keep the intervals between the data packets.
  • Custom IO timeout – enable this option if you need to substitute the Read/Write timeout events. The values are indicated in milliseconds.

4. Press “Start”.